Description
Hide the gap under a 5-gang Lutron switch plate with this 1/8" depth ring. This ring sits underneath a Lutron screwless cover to fill a gap of .125" between the cover and the wall.
This depth ring solves the problem of visible edges around a 5-gang electrical box with edges that are exposed.
Features
- 4.7" H x 10.19" W x 3 mm (1/8") D, stackable to needed depth
- inner opening 4-1/4" H x 9.7" W
- provides a cosmetic solution for a gap behind a wall plate
- raises surface 1/8" around a 5-gang box
- stack to fill larger depths - .25", .375", .5", .62", etc.
- white, ivory, brown, black and clear hard plastic gaskets
- for use on flat surfaces only; sanding the wall can remove bumps for a flush look
- purchase 5-gang Lutron cover plate separately if needed
- made exclusively by Kyle Switch Plates
- gloss acrylic material - do not bend or it may crack
- clean with warm water
- sits around electrical boxes with 5 devices (switches, dimmers, outlets, etc.)
- WARNING: for indoor decorative use only. Ensure devices are properly installed in box. Important: if using with protruding devices, must use fire safety box extenders and spacers to ensure devices are safely installed
- held in place by friction when plate is installed over it, or by using electrical tape or caulking
- custom made in U.S.A.
Uses
- Hide edges of 5-gang electrical box that protrudes from wall
- For use with a 5-gang Lutron screwless cover
- Covers edges on flat wall plates made of glass, stone, forged metal, etc.
