Description
Fix unsightly edges behind a midsize wall plate with 6x4" oversized gap fixer wall plate depth ring extender. Stack these .125" deep jumbo gaskets to hide a 1/4", 3/8", 1/2" or deeper exposed wall box for a quick and easy solution for protruding boxes or devices. Solves two problems at once when used with our oversized wall switchplates: you can cover holes in the wall around the box as well as fill the gap behind the plate where it does not reach the wall. Use with most electrical devices including rocker or toggle light switches, duplex electrical outlets, dimmers, GFI, ceiling fan controllers, etc.
Features
- 6" high x 4.25" wide x 1/8" thick with wide face for use with a variety of larger-than-standard sizes - midsize, oversized, etc.
- provides extra coverage around the face of oversized 1-gang plates - good solution when an oversized plate is not quite large enough
- package of 1 white, ivory, brown, black and clear hard plastic gaskets
- stack multiple units to fill needed depth - .25", .375", .5", .62", etc.
- use with midsize (4.88" x 3.13") plates or larger (up to 6" x 4.25")
- inner opening 4.75" H x 3" W - so your plate must be larger than this
- fits around 1-gang electrical boxes
- provides a cosmetic fix for space under outer edges of face plate
- for use on flat surfaces only; sand wall to remove bumps as ring may crack if bent
- buy midsize or oversized 1-gang wall switch plate cover separately if needed
- WARNING: for indoor decorative use only. Ensure devices are properly installed in box. Important: if using with protruding devices, must use fire safety box extenders and spacers to ensure devices are safely installed
- held in place by friction when plate is installed over it, or by using electrical tape or caulking
- Kyle Switch Plates exclusive product
- gloss acrylic, clean with warm water
- made in USA
Uses
- Hide edges of electrical boxes sticking out from wall while protecting area around box
- Build up area around electrical box if bulky wiring causes devices to stick out of box (use with box extender)
- Fill gaps caused by custom-cut wall plates made from flat materials like granite, marble, glass, mirror, etc.
