Description
Touchplate's two-wire Innova 1 LED lighted low voltage switch station features 1 white momentary push button switches with an LED light for indicating a light or equipment is running. Update vintage type Touch-Plate 1-button lighted units with this modern low voltage switch.
Features
- 2 wire low voltage system for both commercial and residential environments
- 4 amp @ 28 volts switch contact rating
- 1 momentary contact switch; sends an analog/contact closure response; dry contact
- medium sized, heavy duty, dry contact; single pole, single throw
- 10-24VDC LED power
- 18-20 AWG wire type
- each switch has a separate common wire
- fits a Decora style wall plate opening
- buy Touchplate screwless wall switchplates
- industrial grade buttons
- medium-sized square push button switches
- environment 0 - 140 degrees F in non-condensing atmosphere
- two 1" mounting screws included
- add the free Touch-Plate wiring instructions if needed
- clear button that lights up when on
- made in USA
- switch cap engraving service available - please contact us
Find more Touch-Plate electrical switch styles and wall covers at Low Volt Touchplate Switches and Wallplates.
Q & A
Q. Can this Touch Plate switch unit be wired like 3-way switches?
A. Yes, these function as 3-way low voltage momentary switches when wired in parallel to the relay it is controlling, and the relay will respond when receiving a signal from either of the switches.
Q. I don't have pilot light functionality now. Can I use these?
A. No. Pilot light functionality requires an extra wire in the walls plus a Pilot Light Power Transformer 6V for each pilot light. If you do not currently have that extra wiring then it would have to be run through the walls first.
