Description
Cover a single modern dimmer and a currently installed Decora outlet/timer/fan switch (not included) with this solid brass 2-gang switch plate cover that darkens over time to a rich patina.
The set features a solid-brass rotary dimmer on a combination dimmer/outlet plate. The natural uncoated finish will patina and darken over the years. Simply push in to turn lights on/off then twist the knob to dim lighting to level desired. Coordinates nicely with antique hardware and vintage finishes.
Plate Features
- .040" thick solid brass; raw brass finish, no coating, unlacquered
- raw finish will change over time; no finishing so discolorations from oxidation, scratches, or marks are normal
- surface may be sanded to remove oxidation
- mixed-use dimmer-duplex wall plate made in USA
- device mount screw holes; 1/2" installation screws
- small 3/8" round hole for dimmer shaft next to duplex opening - rotate plate to position dimmer on either side
- duplex outlet opening has screw hole in center between the two sockets
- three 1/2" matching brass screws
Dimmer Features
- one 600W incandescent or halogen/150W LED CFL dimmer
- 1-pole or 3-way dimming per installation setup
- push on/off, rotating adjusts lighting levels over full range of dimming
- Leviton (made in China)
- use with dimmable CFL, LED, incandescent or halogen light bulbs
- RFI filter
- NOTE: duplex receptacle not included - purchase separately based on need/type/usage
Knob Features
- one solid brass rotary rheostat knob made in USA
- 3/4" round x 1/2" deep
- unfinished solid brass with set screw (requires 5/64" hex wrench, not included)
Installation: Dimmer mounts to box; plate mounts to dimmer and the center screw hole on your duplex outlet/stacked switch, etc. (Duplex device not included.)
Shop for more Light Dimmer Devices.
