Description
Add retro/modern style with this brass dimmer knob set that can be combined with a currently installed toggle switch. The set features a solid-brass rotary knob dimmer on a combo switch plate. The natural, living finish will patina and darken over time. Simply push in to turn lights on/off then twist the knob to dim to the desired lighting level. Coordinates with antique hardware and vintage finishes.
Plate Features
- .040" thick solid brass; raw brass finish: no coating, no lacquer
- raw finish ages over time - discolorations, oxidation, and marks are normal
- surface can be sanded at any time to remove oxidation, scratches, etc.
- mixed-use dimmer-toggle faceplate made in USA
- device mounting screw holes on both gangs; 1/2" installation screws
- 3/8" round hole for rotary dimmer stem; toggle opening can fit your standard toggle device - garbage disposal switch, pump control, 20A devices, etc.
- four 1/2" matching brass screws
Dimming Switch Features
- one 600W incandescent or halogen/150W CFL LED dimmer
- can be installed as single-pole (1P) or 3-way (3W) dimming switch (use non-dimmer on other end of 3-way setup)
- push on and off, rotate to dim lighting levels across a full range
- Leviton Manufacturing (made in China)
- use with dimmable LED, CFL, halogen, or incandescent light bulbs
- RFI filter
- NOTE: toggle switch not included - purchase separately based on need/type/usage
Knob Features
- one solid brass knob made in America
- 3/4" x 1/2" deep round rheostat knob
- provides same 1/2" clearance as traditional plastic knob
- unfinished brass with set screw (requires 5/64" hex wrench, not included)
Installation: Dimmer mounts to box; plate mounts to dimmer and your toggle switch (not included). Then install knob on dimmer shaft and secure with set screw.
Shop for more Lighting Dimmers.
