Description
Cover a single modern dimmer and a currently installed Decora outlet/timer/fan switch (not included) with this solid brass 2-gang switch plate cover that darkens over time to a rich patina.
The set features a solid-brass rotary knob dimmer on a combo switch plate. The natural uncoated finish will patina and darken over the years. Simply push in to turn lights on/off then twist the knob to dim lighting to level desired. Coordinates nicely with antique hardware and vintage finishes.
Plate Features
- .040" thick solid brass; raw brass finish, no coating, unlacquered
- raw finish may appear aged with discolorations from oxidation, scratches, or marks
- surface can be sanded to remove oxidation
- mixed-use dimmer-decora switchplate made in USA
- device mount screw holes; 1/2" installation screws
- small 3/8" round hole for dimmer shaft; block Decora opening is standard 2.625" H x 1.312" W
- all block receptacle devices, Decora rocker, GFCI, and slide fan controller devices fit into these decorator light switch covers (Decora is a Leviton trademark term)
- two 1/4" (rocker) + two 1/2" (dimmer) matching brass screws
Dimmer Features
- one 600W incandescent or halogen/150W LED CFL dimmer
- 1-pole or 3-way dimming
- push on and off, rotate to adjust lighting levels - full range of dimming
- Leviton (made in China)
- use with dimmable CFL, LED, incandescent or halogen light bulbs
- RFI filter
- NOTE: decorator block device not included - purchase separately based on need/type/usage
Knob Features
- one solid brass knob made in USA
- 3/4" round rheostat knob x 1/2" deep
- unfinished solid brass with set screw (requires 5/64" hex wrench, not included)
Installation: Dimmer mounts to box; plate mounts to dimmer and the outer screw holes on your Decora outlet/timer/switch, etc. (Decora device not included.)
Shop for more Light Dimming Devices.
