Description
Install taller high-end camera doorbell and specialty digital electrical units in a standard double-gang box with this customized wallplate. Cover has specially-positioned corner screw holes that are more widely spread than normal to accommodate a larger camera doorbell placed in the center of the box. The 2-27/32" H by 2" W center cutout is larger than a Decora rocker plate opening (which is only 2-5/8" H x 1-5/16" W) and is designed for updated thermostats, home security systems, nurse call stations, remote lighting controllers, and other specialized electronic control components that are too bulky for a single-gang box.
Features
- 6 3/8" H x 4 1/2" W x 5/32" D metal cover
- custom specialized plate made in USA
- fits a 2-gang masonry box (screw holes spaced 3.281" vertically and 1.812" horizontally)
- designed to adapt high-end doorbells like certain models of the Ring Elite or Doorbell Fon to fit into the center of a 2-gang handy box
- set includes 1 cover, 2 hex nuts, 4 triangular straps, four flat head 1/2" screws, four oval head 1/2" screws
- .050" anodized aluminum; bronze baked powder-coat finish
- center cutout is 2.85" H x 2.0" W - mount your specialty doorbell in the center using your device screws and the included nuts
- countersunk corner screw holes 3-3/8" apart vertically and 3-3/32" horizontally
- corner screw holes will align for installation with installed triangle straps
- to install, mount doorbell to plate using included hex nuts, then mount cover directly to the wall box
- rectangular opening designed to accommodate specialty items such as thermostats, timers, fire alarms, etc., with bulky housings and larger facing
- check electrical box compatibility for this cover plate
- IMPORTANT: designed for partially-recessed styles rather than flush-mount units
- check for clearance around the box and plate due to obstructions like brick and masonry
- does not work with surface-mount doorbells (you cannot mount your doorbell inside or behind the center cutout)
- some assembly required
- use with a moisture gasket, weatherstripping or silicone for a tight seal
- may replace old DoorbellFon door bells, doorchimes, door speaker intercoms, etc.
- triangle steel straps are 1.375" wide by 1" tall with device mounting holes and long slot holes (for adjustment)
- mount straps on the diagonal with end of long slot installed into box, and threaded center hole arranged at corners of box to create wider screw spacing; see photos