Creative Solutions Since 1982

Deep Beveled Single GFCI Decora Rocker Switch Plate Covers

Item #:
13 reviews Write a Review
$7.95 - $9.95
Usually ships in 1-2 business days.
Design Preview
This image reflects design only, not finish.


Flat Rate Shipping on any size order*

  • Ships Fast
  • No Minimum Order
  • 30 Day Returns
  • No Restocking Fees
*Learn More


Deeper Style Raised Single Decora Rocker Light Switch Plates

Deep single gang Decora rocker switch plates for covering Decora devices in a 1 gang electrical box that is raised about 1/8" above the wall surface.

Note - because of steep bevel on edges, screws holes are pulled in to be at box mount spacing. To install, go through switch plate, through device, then into electrical box with the same 1/2" screw. If your plate will be floating above the box (not touching it) because of bulky devices, you will need to order longer screws.


  • made in USA
  • deep metal outlet covers
  • 2-3/4" W x 4-1/2" H x 5/16" D
  • note - screw holes are spaced 3.281" apart for box mounting rather than standard strap mounting distance of 3.812" apart because of wide bevel
  • some crossgrain marking along edges of the stainless steel covers from the deep stamping process
  • 2 matching 1/2" screws - length appropriate if plate fits against box; order longer screws if you are raising the plate away from box
  • modern square opening fits all rocker, GFI, block, paddle, and Decora style devices (Decora is a Leviton trademark term)

Need to find an even deeper rocker outlet cover? Use with an extender ring which adds another 1/4" depth.

Related Products

Recently Viewed

Product Reviews

  • D
    Da Mama Verified Buyer
    5th Sep 2018
    Did the job.

    No issues with the product or the delivery time. Wish that it came in plastic so that I could "modify" it. This was purchased to fit in a tight spot and I needed to cut a notch to fit around existing obstacles. Easier to cut plastic but looks nice none-the-less.

  • I Verified Buyer
    5th Jun 2018
    Right outlet cover to revolve a commen problem

    Ordered this deep cover plate for outlet in my Mud room renovation project that was sticking out more than 1/2" from stud.
    After installing the deep outlet cover, there is no gap between wall and outlet. Gives outlet a nice smooth finish with wall.

  • K
    Ken Verified Buyer
    10th May 2017
    Good looking but not able to adjust even a little

    These look good but because the screws go into the box with no side to side adjustment allowed, if the box is not perfectly straight which mine were not then the cover ends up crooked.

  • S
    Scott Cavendish Verified Buyer
    6th Oct 2014
    Good Plate, Short Screws

    Plate is good, works well if you need a deep plate. My only complaint is that it only came with 1/4" screws which need to go through the plate, the device, and into the box. I called to make sure these were the correct screws, and they assured me that they would work. Well they did, but I was only able to get about a 1/4 turn of grip into the box. Not very reassuring. They told me I could purchase longer screws from their website. Fortunately I had some 1/2" screws from another faceplate that I removed that worked perfectly. Why they don't just include 1/2" screws when it has to go through the device and into the box is beyond me. --Thanks for the suggestion. We will include 1/2" screws in the future.--Staff

Easy Shopping
No Minimum Order
Largest Selection
Quality Plates Made in USA
Prompt Shipping
Easy Returns