Description
Narrow Double Rocker Outlet Switch Plates Are Only 4" Wide
These extra narrow 4" double rocker light switch covers are skinnier on both sides yet still have beveled edges on all four sides. They are designed for tight spaces between cabinets or on slim pillars where there is not enough room for regular plates. Perfect for situations where electrical boxes are mounted up against tiling, brick, door jams, pedestals, window frames, cabinets, or bookcases. Great solution in locations where there is not enough room on either side for the full width of a standard wall plate. If you have a combination plate with a toggle switch or duplex receptacle, we recommend updating your switches to the modern decorator versions to accommodate your specialty installation.
Features
- custom plate - hand cut and welded; manufactured in USA
- 4" W x 4-1/2" H x 5/32" D metal wallplates with beveled edges
- distance between device opening and outer edge is 0.45" (29/64") on both sides
- distance from center of screw hole to side edge of plate is 1.094" (1-3/32") on both sides
- distance from center of screw hole to top (or bottom) edge of plate is 0.344" (11/32")
- 4 matching 5/16" installation screws
- all openings are in standard locations to fit your current devices - only the overall width of the plate in skinnier
- narrow Decora rocker wallplate cover not produced in plastic - custom size is Kyle Switch Plates exclusive
- openings designed for all brands of decorator rocker, GFCI, block, and Decora style devices (Decora is a Leviton trademark term)
