Touchplate's Classic white low voltage three gang light plate cover is designed to replace the old plastic triple covers. These new replacements feature sturdy 2-part metal covers that install with screws rather than pushing on like the old screwless versions. These work with both the unlighted or the LED switches.
- 7.0" x 5.12" two-part metal switch plate
- three 2" x 1-9/16" switch openings
- 3-9/32" screw holes spacing center to center
- six 1-1/2" white mounting screws
- CLAC3-WHT by Touch-Plate
- painted satin white; color slightly lighter than plastic switches
- American made
Installation Instructions: Because of these plates attach differently than the old push-on versions, you will need to unscrew the switch panel then pull it through the center of the frame before seating the panel on the frame. (At this stage the frame is behind the switch panel.) Next, layer the cover over the switches. To install, insert mounting screws through the top cover, the switch control panel, the frame and then into the electrical box.
Shop Touch-Plate Lighting Low Volt Control Units & Wall Plate Covers for more configurations and colors.