Description
Narrow and Short Centered Decorator Rocker Switch Plates
Our centered rocker 4" x 4" plate allows a fit in locations where there is not enough room on all sides for the full width of a standard wall plate. Perfect for situations where a one gang electrical box is mounted up against tile, brick, door jams, window frames, cabinetry, or bookcases.
Features
- 4" W x 4" H x 5/32" D metal outlet or switch cover plate with one Decora cutout
- 2 matching 1" screws
- screw holes are moved to the box mount location so you can trim off the ends of the straps
- 3.281" screw spacing (box mounting)
- 0.36" from center of screw hole to edge of plate on top and bottom
- 1.62" from device opening to side edge of plate
- opening designed for all brands of modern rocker, GFCI, block, and Decora style devices (Decora is a Leviton trademark term)
- standard Decora opening: 1 5/16" W x 2 5/8" H
- custom made in the USA with beveled edges on all four edges
Installation Note: Because of the short top and bottom edges, screw holes are set to box mounting with a spread of 3.281" instead of standard strap mount distance of 3.812". To install, use the same screws to go through both the switchplate and the devices directly into the electrical box.
