Description
Three Toggle Light Switch Plates
Triple gang toggle wall plate covers with beveled edges and a smooth surface designed for covering 3 toggle light switches or dimmer toggles.
Features
- made in USA
- ULC and UL listed
- 6-3/8" W x 4-1/2" H x 5/32" D
- 6 matching standard length 1/2" screws
- switchplates have standard device and screw hole openings and will fit any toggle light switches or toggle dimmers
- available metal finishes - satin stainless steel, white, black, brown, spec. grade stainless steel, dark bronze, gray, red, almond, ivory, polished brass, satin brass, antique brass, satin bronze, oil rubbed bronze, silver polished chrome, brushed aluminum
Looking for an oversized version? Purchase the Bigger 3 Toggle Cover Plate.
Installation Tip for Multiple Gang Switchplates: If you are having trouble installing this standard wallplate, your switches may be out of alignment. First check that the switches are properly aligned in the electrical box. Try holding the switch plate up to the wall and visually inspecting the device positions. If switches are misaligned with the switchplate screw hole openings, the position of the switches will need to be adjusted. Slightly loosen the screws holding them in the box, then hold the switch plate over them and use a screwdriver to shift the switches into the correct position. Remove plate and carefully tighten the device screws. Now you'll be able to easily install your cover plate. If your devices are set too deeply into the wall you may need longer screws.
